Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Redlands, CA | Alder Contractors
We provide independent Tremron paver and hardscape installation, replacement, and repair across Redlands, CA. We’re not Tremron-authorized, and we don’t pretend to be. What makes our Tremron work different here is simple: we know how Redlands’ clay soil, historic-district rules, and extreme heat shape a paver project before the first shovel goes in. Call (833) 467-7020 for a free estimate.
Our crews have installed and repaired Tremron paver systems throughout the Inland Empire for years, from Tremron repair in Loma Linda to Redlands, working with the classic 3-Piece Paver Series to Mega Olde Towne pavers and the big-format Plaza slabs. We read Tremron’s technical bulletins, match base prep to the manufacturer’s published specs, and never claim to be a Tremron-authorized dealer. We’re an independent hardscape contractor with deep brand-level familiarity, and we serve every Redlands ZIP code: 92373, 92374, and 92375.
If your Tremron paver driveway or patio in Redlands is showing settlement, chalky color loss, or joint sand washout, we can diagnose it properly and tell you straight whether it’s repairable or needs a full replacement. Most estimates take under an hour, and we walk you through exactly what’s failing and why before quoting a dollar.
Why Redlands Residents Choose Us for Tremron Service
We grew up working on homes in the Inland Empire. Nelson Ibarra, owner of Alder Contractors, spent nearly three decades on Inland Empire job sites and picked up his trade fundamentals at Chaffey College in Rancho Cucamonga. That local grounding means we know what a Redlands paver job demands: clay-heavy soils, a historic-preservation overlay in the 92373 core, and summer heat that can cook a poorly planned concrete pour.
Our crews work with Tremron OEM color-matched joint sand and edge restraints whenever the project calls for them. Where OEM stock isn’t available quickly, we source aftermarket polymeric sands and base aggregates that meet or exceed Tremron’s published specs. We don’t cut corners on base prep, because we’ve seen what happens in Redlands when a base is built thin: efflorescence blooms after the first wet winter, pavers settle, and joint sand disappears down the slope. Do it right the first time, the callback always costs more than the extra hour up front.
For paver driveway installation, paver patio work, and driveway replacement in Redlands, we work from a written line-item quote with fixed pricing. Homeowners know the scope before the first pallet of Tremron pavers lands on the driveway.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Redlands
- Efflorescence after wet winters. Redlands gets monsoon-style winter rains that saturate clay-heavy soil. When the base under Tremron pavers drains poorly, water wicks up through the paver body and leaves white mineral deposits on the surface. We repair the drainage layer and the efflorescence source rather than sealing over the symptom.
- Color loss and surface scaling from heat and grit. Redlands summers regularly pass 100°F, and Santa Ana winds drive abrasive grit across paver surfaces. Over time, Tremron integral color fades and the surface begins to scale. We stock replacement pavers and can field-match what’s salvageable before recommending a partial or full reset.
- Edge spalling and joint sand washout on sloped driveways. Many Redlands lots near the Crafton Hills edges have real slope to them. When the sub-base under a Tremron driveway wasn’t compacted to spec, the edges chip and the joints empty out after every storm. We rebuild the base with compacted aggregate and re-set the edges with proper edge restraint.
- Settlement and lippage on historic-core lots. Redlands 92373 has a lot of early-1900s wood-frame homes, and excavation often uncovers original redwood foundation debris or citrus-era brick rubble. A Tremron paver field laid over that kind of organic base will settle unevenly within a few seasons. We excavate to stable soil before rebuilding.
- Mismatched color lots after spot repairs. Older Tremron runs change color between manufacturing lots. When more than 20% of a paver field is spalled or settled, we recommend full replacement, because trying to patch a failing field produces a checkerboard of mismatched tones and the base failure usually extends beyond the visible damage.
Tremron Service in Redlands: What Local Conditions Mean for Your Equipment
Redlands’ historic preservation review is the variable nobody tells you about until a project stalls. Any street-visible hardscape alteration in the 1880s – 1930s historic districts around downtown and Smiley Heights can trigger a preservation sign-off before a driveway apron changes shape. That’s a step crews working in San Bernardino or Tremron in Highland almost never navigate. We handle the review paperwork with the client before the first stake goes in.
We tore out a failing 20-year-old Tremron 3-Piece Paver driveway on a Craftsman home near Smiley Heights where the original base had been laid over citrus-era brick rubble, similar to Colton Tremron service projects we’ve handled. The pavers had lipped and the joints had washed out after every winter storm. We excavated to stable soil, rebuilt the base with compacted aggregate, reset the salvaged Tremron pavers with OEM color-matched sand, and added a concealed drainage channel, then walked the client through the historic-district review process before any work started. That sequence matters here.
On the newer east side of Redlands, the soil and slope profile changes. 92374 sits on better-draining ground in places, but the Santa Ana wind still grinds dust and grit into any exposed paver surface. Installation scheduling has to respect the heat too. We pour and compact in the early morning window during summer months, because a 105°F afternoon surface temperature ruins compaction consistency and shortens open time on polymeric sand.
Tremron Models & Products We Service in Redlands
We install and repair the Tremron 3-Piece Paver Series, the Mega Olde Towne Paver line, Sierra Blend wall blocks, and both Plaza I and Plaza II large-format slabs. Each line has a distinct concrete mix and jointing profile, and we match the base prep and edge restraint to the specific product spec rather than treating all pavers as one job type.
OEM parts matter where color matching and dimensional consistency are critical: joint sand, edge restraints, and replacement pavers from the same manufacturing lot where possible. For structural work below the surface, we source aftermarket aggregate and polymeric sand that meet Tremron’s published specs. What matters is the load-bearing layer under the paver, not the brand on the bag.
If your Redlands project falls outside paver work entirely, our wider hardscape capability still fits. We carry a full general contracting scope, from roofline to backyard, which means a Tremron driveway job can include the drainage, retaining course, and perimeter fencing in one contract. See our broader Tremron sales & service page for the full brand-level detail.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Redlands
Pricing on Tremron work in Redlands shifts based on excavation depth, slope correction, base rebuild thickness, and whether the lot requires historic-district review before work starts. A flat, modern east-side driveway will run differently from a historic-core Craftsman lot with centuries of buried brick under the surface. The table below reflects current market pricing for the three most common scopes we handle in Redlands:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every free estimate includes a base inspection, drainage review, and a written line-item quote. No change orders on the back end because the scope is set before we start. Call (833) 467-7020 to schedule yours.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Redlands
Yes. Redlands’ clay-heavy soils hold water and expand and contract through wet-dry cycles, so a standard 4-inch base often isn’t enough. We typically excavate to stable native soil, install a compacted aggregate base, and add a geotextile separator where clay is present. Call (833) 467-7020 for a free base assessment on your property.
If the driveway is visible from the street and sits within one of Redlands’ designated historic districts, no. Any alteration to a street-visible driveway apron or paver field can trigger a preservation review before work begins. We handle that paperwork with you before the first shovel goes in. Call (833) 467-7020 and we’ll verify status for your address.
That’s efflorescence, and in Redlands it’s almost always a drainage problem under the paver base. Water wicks up through the concrete, evaporates at the surface, and leaves mineral salts behind. Sealing over the white doesn’t fix the source. We correct the base drainage and clean the surface properly. Call (833) 467-7020 for an inspection.
We schedule compaction and polymeric sand work in the early morning hours during summer months, when surface temperatures are below 90°F. A 105°F afternoon slab temperature ruins compaction consistency and shortens the open time on joint sand. Summer installs take slightly longer but hold up better. Call (833) 467-7020 and we’ll give you a realistic window for your street.
We use Tremron OEM color-matched joint sand and edge restraints whenever they’re available for your specific paver line. Where OEM stock isn’t available quickly, we source aftermarket polymeric sands and aggregates that meet Tremron’s published specs. What we won’t do is substitute a lower-spec product to save a buck. Call (833) 467-7020 for a material list on your project.
Service Areas Near Redlands
We run Tremron service throughout Redlands and into the surrounding Inland Empire communities: Bloomington, Muscoy, Fontana, Colton, San Bernardino, and Grand Terrace. If you’re on the edge of our Redlands coverage area or a few miles out, call and we’ll confirm the route. We also cover Tremron service in Jurupa Valley and Tremron service in Rancho Cucamonga for clients on the west side of the county. Our full Redlands service area page lists every ZIP we cover.
Book Your Tremron Service in Redlands Today
If your Tremron paver driveway, patio, or walkway in Redlands is settling, spalling, or washing out, call (833) 467-7020 and we’ll send someone out to look at the base and the surface. Estimates are free, and we’ll tell you straight whether it’s a repair or a replacement.
Written by Nelson Ibarra, Owner at Alder Contractors, serving Redlands and the Inland Empire for nearly three decades.