Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Ontario, CA | Alder Contractors
We install, repair, and refinish Cambria quartz countertops across Ontario, and we do it as an independent fabricator-installer, not a manufacturer-authorized dealer. That includes Cambria repair in Montclair and surrounding communities. That matters here because Ontario homes split between narrow-lot 1950s tract houses in the 91761 and 91762 core and newer 1980s-to-2000s subdivisions further east and south, and each presents different templating and seam challenges. If your Cambria island edge is chipped, your seam has opened up, or you’re planning a full kitchen refresh with Cambria Ella or Torquay, call (833) 467-7020 for a free estimate. We measure, template, and set every slab ourselves.
Why Ontario Residents Choose Us for Cambria Service
We’ve handled enough Cambria slabs to know exactly how each series behaves under an Inland Empire sun. Nelson Ibarra, our owner, spent decades framing and finishing homes across Rialto, Upland Cambria service areas, and the surrounding San Bernardino County communities, and that background shapes how we approach every countertop job: check the framing first, template to the actual cabinets, never assume the wall is square. Ontario’s older tract homes rarely have level cabinet runs, so a slab that fits on paper can look wrong once it’s set if nobody re-shimmed the base first. We carry Cambria-matched quartz, color-matched epoxies, and proper edge profiles for fast turnaround, and we always favor repair over replacement when the slab itself is sound.
Styles & brands we work with
Common Cambria Construction Problems We Solve in Ontario
- Edge chipping on island overhangs. Cambria is hard, but an unsupported overhang past the cabinet framing will crack at the edge when a chair or cart strikes it. We see this constantly on tight-lot Ontario kitchens where islands are pushed close to traffic paths. The fix is a supported overhang, rebuilt edge, or re-polish depending on depth.
- Heat scorching near slide-in ranges and wall ovens. Ontario kitchens run hot, and a pan set too close to an unsupported seam can craze or discolor the quartz. We’ve repaired scorch marks on Cambria Torquay and Whitehall in 91761 homes where the range sat inches from the slab edge. Sometimes it’s a re-polish; sometimes that section of field needs replacing.
- Seam separation on slab-on-grade and older floors. Mid-century tract homes in Ontario shift subtly with the dry, stable soil, but that movement still stresses rigid Cambria seams. A poor epoxy joint opens up as a hairline crack. We re-epoxy with color-matched material and re-align the slab when possible.
- UV and dust-driven finish degradation. West-facing countertops near windows in Ontario take intense afternoon sun, and the Santa Ana winds push grit across matte finishes like Cambria Ella. That grit scratches when wiped. We re-polish matte surfaces to restore the original sheen without over-glossing.
- Out-of-level slab setting on old framed cabinets. A 1960s stucco home in the 91761 ZIP rarely has perfectly level cabinet decks. Setting a Cambria slab on an unlevel base leaves gaps under the edge and stress points that chip later. We re-shim, re-level, and template to the actual framing before the slab ever goes down.
Cambria Service in Ontario: What Local Conditions Mean for Your Equipment
Ontario sits at a strange crossroads for countertop work. Along the I-10 and 60 corridors, tilt-up warehouse shells go up constantly, and many of those jobs include breakroom and office countertops spec’d in quartz. A few blocks away, the 91761 and 91762 residential core holds 1950s-to-1970s single-story stucco tract houses on narrow lots with aging utility laterals. That split means our Cambria work lands in two very different settings: open commercial slabs with straightforward cabinetry, and cramped residential kitchens where the island has to be templated around tight framing, old plumbing stub-outs, and door swings. A generic fabricator treats both the same. We don’t. Templating a Cambria Ella island for a 1960s Ontario tract kitchen means accounting for walls that aren’t square, floors that dip, and a lot width that makes slab delivery an exercise in patience. On a recent 91761 job, we replaced a chipped, heat-scorched laminate countertop with a Cambria Ella island and perimeter run. The old cabinets were out of level and the narrow lot made slab delivery tight, so we re-shimmed the base, templated the Cambria to the actual framing, and set a supported overhang so the new island edge wouldn’t chip under chairs. The homeowner got a clean, marble-look kitchen that fits the house’s postwar footprint without a full gut.
Cambria Models & Products We Service in Ontario
We work across the Cambria line. Cambria Ella, the marble-look matte series, comes up constantly for Ontario kitchen islands and full-height backsplashes in postwar remodels. Cambria Britannica and Brittanicca Gold show up in 1980s-to-2000s east and south subdivision kitchens. Torquay and Whitehall are common choices for the 91761 and 91762 refreshes. For bathroom vanities and walk-in shower surrounds, we set a lot of Cambria Annaleigh and Hawksmoore. On parts, we use Cambria-matched or equivalent quality quartz, color-matched epoxy, and proper sink and edge profiles, never cheap universal kits. On repair-vs-replace calls, we always favor re-polishing, seam re-epoxy, or edge rebuild over pulling a sound slab. Full replacement is reserved for cracked or heat-damaged fields. See our Cambria sales & service overview for the full scope.
See the difference
Before
After
Before
After
Before
AfterCambria Service Pricing in Ontario
Ontario pricing tracks the scope of the job, the slab series, and how much prep the existing cabinets need. Here’s what we typically see across the city:
| Service | Typical Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the number: whether you need re-shimming and cabinet leveling first, whether the slab is one piece or has seams, whether edge rebuilding is required, and which Cambria series you choose. A free estimate includes us measuring the space, checking cabinet condition, and giving you a written line-item breakdown. No change orders because we missed a framing issue. Call (833) 467-7020 for exact pricing on your Ontario project.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Ontario
Yes. We keep color-matched epoxy and Cambria-matched quartz on hand for the series most common in Ontario, and we can order matching slabs through our supplier network when needed. Your best move is to send us photos of the existing slab and the seam or chip you want repaired, and we’ll tell you what’s feasible before we schedule. Call (833) 467-7020 and we’ll walk you through it.
Almost always because the overhang past the cabinet framing was too aggressive or unsupported. Ontario’s narrow-lot kitchens push islands into traffic paths, so chairs and carts hit the edge more often. The engineered surface is hard, but an unsupported corner will crack. We rebuild the edge and set a supported overhang so it doesn’t happen again.
Heat damage looks like crazing, a dull white haze, or a slight texture change you can feel with a fingernail. Stains sit on the surface or in a seam and usually respond to proper quartz cleaner. In Ontario kitchens where ranges sit close to slab edges, scorch marks are common. We can usually re-polish light heat marks; deep cracks from a hot pan mean replacing that section. Call (833) 467-7020 for an assessment and an exact quote.
Yes. Cambria Annaleigh and Hawksmoore are two series we set regularly in Ontario bathroom remodels, both for vanities and full walk-in shower surrounds. We template to the waterproofed substrate, not to the old tile, and we use proper edge profiles so the finished install sheds water correctly.
We template to the actual framing, not the cabinet box dimensions. Ontario’s 1950s-to-1970s tract homes have walls that drift, floors that dip, and narrow side yards that make slab delivery tight. We re-shim bases, account for door swings and old plumbing stub-outs, and cut the slab to the real dimensions. The result is a countertop that fits the house as it actually is, not as the original blueprints said it should be.
Service Areas Near Ontario
Our crews cover Ontario and the surrounding cities. We’re in Bloomington, Muscoy, Fontana, Colton, and San Bernardino regularly. If you’re in our Ontario service area or nearby, we can schedule a template and estimate. For Cambria work up the hill, see Cambria service in Running Springs and Cambria service in San Antonio Heights.
Book Your Cambria Service in Ontario Today
Do it right the first time – the callback always costs more than the extra hour up front. If you need Cambria installed, repaired, or refinished in Ontario, call (833) 467-7020 for your free estimate. We’ll measure, template, and set it ourselves.
Written by Nelson Ibarra, Owner at Alder Contractors, serving Ontario and the Inland Empire since 1998.