Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colton, CA | Alder Contractors
We provide independent KraftMaid cabinet installation, refacing, and full kitchen remodeling across Colton, CA, as a trusted Colton General Contractor. What makes our KraftMaid work different here is straightforward: Colton’s older tract homes have framing that shifts under decades of Santa Ana wind, and KraftMaid boxes fastened to that framing need more than a swap-out. They need re-securing, shimming, and a crew that knows what’s behind the wall before the first cabinet goes up. Call (833) 467-7020 for a free estimate.
Why Colton Residents Choose Us for KraftMaid Service
Our crew has installed and serviced KraftMaid cabinetry across Colton’s mix of mid-century tract homes and newer infill for years. We know how Momentum series doors behave, how Delray full-overlay maple boxes sit on uneven framing, and how Homestead door fronts react to Colton’s heat swings. We’re an independent contractor offering Highgrove KraftMaid service, not affiliated with or authorized by KraftMaid. That independence means we diagnose what’s actually in your kitchen, not what a manufacturer’s warranty flowchart assumes. Nelson Ibarra grew up in the Willow Avenue corridor of Rialto and has spent three decades working on Inland Empire homes, so when a face-frame joint loosens on a 1960s Colton tract house, he’s seen it before. It’s rarely the cabinet’s fault. It’s usually what the cabinet is mounted to. We bring that distinction to every KraftMaid job we touch in Colton.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Colton
KraftMaid makes solid cabinetry. Colton’s conditions still find the weak points. Here’s what we see most often across Colton kitchens:
- Binding doors and loose face-frame joints. Cajon Pass wind events push fine dust into hinge tracks and face-frame joints. On older Colton tract homes, the result is doors that stick, catch, or sit proud of the frame. We disassemble, clean, re-align, and replace worn hinges with OEM KraftMaid hardware when lead time allows.
- Swollen particleboard box bottoms. Colton’s original single-pane windows let summer heat and winter storm moisture swing humidity hard. Cabinet boxes near those windows, especially under sinks, take the brunt. We’ve pulled boxes where the particleboard bottom crumbled to the touch. The fix is often a plywood bottom replacement, not a full tear-out.
- Peeling thermofoil and laminate fronts. West and south-facing walls in post-WWII Colton homes hold heat. That heat cycles into cabinet fronts and breaks down the adhesive under thermofoil. We see blistered cabinet doors on those walls every summer. Refacing is usually the answer.
- Worn drawer glides and shelf pins from airborne grit. Santa Ana dust settles into cabinet interiors during any nearby construction or even just a windy week. The grit grinds into glides and pins. Drawers start to drag. We replace with OEM-grade slides and re-set pins so the drawers operate clean again.
- Wind-shifted cabinet boxes. This one is Colton-specific. Original boxes fastened to framing that’s moved under decades of wind uplift end up out of plumb. Doors hang crooked no matter how many times you adjust the hinge. We re-secure the box to true framing first, then set the doors. Skipping that step is why some Colton KraftMaid repairs don’t last.
KraftMaid Service in Colton: What Local Conditions Mean for Your Equipment
Colton sits at the foot of the San Bernardino Mountains where the Cajon Pass funnels Santa Ana winds straight into the city. Construction crews here schedule around gust events that are far milder in Redlands or Riverside. For KraftMaid owners, that wind does something specific: it drives dust into cabinet interiors and, over years, works framing connections loose. On the older south-side tract homes, original cabinet boxes are often fastened to wood framing that has shifted from decades of wind uplift and winter storm runoff. A new KraftMaid install on that framing requires shimming and re-securing before new doors and drawers will ever operate smoothly. We’ve done exactly that on a 1960s tract home near the south side of Colton. The doors had been binding for years. The wall framing behind the boxes had moved. The particleboard bottoms had swollen near the original single-pane window. We re-secured and shimmed the boxes to plumb, replaced the swollen bottoms with plywood, and refinished the doors. The homeowner kept the layout and avoided a full replacement. That’s what local KraftMaid service means in Colton: fixing what the house did to the cabinets, not just swapping parts.
KraftMaid Models & Products We Service in Colton
We work across the KraftMaid lines most common in Colton kitchens: Momentum series, Delray full-overlay maple, Homestead door style, and Vantage series. Our parts approach is simple. We source OEM KraftMaid hinges, slides, and touch-up finishes when lead times and budget allow. Where the OEM part isn’t available quickly, we use quality aftermarket hardware only where it meets or exceeds the original spec. We stock the common hinge styles and glide sizes locally so most Colton repairs don’t wait on a factory shipment. We’ll also tell you plainly when a full cabinet replacement makes more sense than patching swollen boxes. A full kitchen remodel in Colton runs $14,000 to $45,000, and sometimes that’s the smarter money. Other times, a $4,000 to $13,000 cabinet installation gets you the same kitchen. We’ll lay out both numbers and let you decide.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colton
KraftMaid work in Colton spans a wide range because the condition of the existing kitchen drives most of the cost. Here are the numbers we quote:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the price is the amount of re-framing and leveling required before boxes go in, plus finish matching if we’re refacing only part of the kitchen. Our free estimate includes a look at the framing behind your existing cabinets, not just a measurement of the cabinet run. Call (833) 467-7020 to schedule one.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well, and we also provide KraftMaid repair in Loma Linda. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colton
In Colton, the Cajon Pass winds push fine dust into hinge tracks and face-frame joints, and over years the wind uplift works the cabinet boxes out of plumb on older tract homes. The door binds because the box it hangs from has shifted, not because the hinge failed. We re-secure the box to true framing, clean the hardware, and reset the doors. Call (833) 467-7020 for a free inspection and a written fix plan.
Yes. We use OEM KraftMaid touch-up finishes where available and color-match from our existing finish kits for older or discontinued styles. Colton’s south and west-facing cabinet fronts fade differently than north-facing ones from heat exposure, so we match to the specific door’s current tone rather than a factory code. Bring us a drawer front and we’ll match it exactly.
They hold up well when they’re mounted to solid framing and kept away from uncontrolled humidity swings. Colton’s hot summers and short winter storm runoff cycles stress cabinet boxes that sit beside original single-pane windows. KraftMaid’s hardwood face frames are durable. The particleboard box bottoms are what fail first. Swapping those to plywood at install time is cheap insurance we recommend on every older Colton kitchen.
Yes. We pull permits and manage inspections for any kitchen remodel that requires them in Colton. Cabinet-only installs and refacing typically don’t need a permit. Moving plumbing, electrical, or load-bearing walls does. We’ll tell you which applies before the job is priced, and we carry the permit through to final sign-off.
Look at the box, not the door. If the face frame is square and the box hasn’t swelled or separated from the wall, we can usually save it with re-leveling, new hardware, and refacing. If the box bottoms are crumbling or the framing behind has pulled away, replacement is often cheaper than chasing repairs. In Colton, full cabinet installation runs $4,000 to $13,000. A full kitchen remodel runs $14,000 to $45,000. Either way, call (833) 467-7020 and we’ll give you an honest read in one visit.
Service Areas Near Colton
Our KraftMaid work covers Colton and the surrounding San Bernardino County communities. You’ll find us regularly in Bloomington, Muscoy, Fontana, San Bernardino, and Grand Terrace. We’re the same crew whether the job is a cabinet reface or a full kitchen tear-out. For more on our KraftMaid work across the region, see KraftMaid sales & service. If you’re just outside Colton, check our Colton service area page for coverage details. We also keep crews near KraftMaid service in San Bernardino and KraftMaid service in Grand Terrace.
Book Your KraftMaid Service in Colton Today
Do it right the first time – the callback always costs more than the extra hour up front. Our KraftMaid cabinet work in Colton includes a free framing assessment, a written line-item quote, and a schedule that holds, plus KraftMaid service in Rubidoux. Call (833) 467-7020 to get on the calendar.
Written by Nelson Ibarra, Owner at Alder Contractors, serving Colton and the Inland Empire for three decades.