Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in Temecula, CA | Alder Contractors
We provide independent Toto installation, repair, and full bathroom construction across Temecula, including every ZIP from 92590 through 92593. What makes our Toto work here different is simple: we know the hard water, the slab flanges, and the HOA remodel rules that Toto fixtures run into in this valley. Call (833) 467-7020 for a free estimate on any Toto toilet, Washlet, or full bath project.
Why Temecula Residents Choose Us for Toto Service
We’ve installed and serviced Toto fixtures across Temecula’s 1990s-2000s tract homes and wine-country custom builds for years. That means we know the washlet supply, flange, and tile-interface details that generic remodel crews miss. We are an independent contractor, not authorized, sponsored, or endorsed by Toto, and every recommendation is based on what we’ve seen hold up in local water and housing stock. Nelson Ibarra, our owner, has spent the better part of three decades working on Inland Empire homes, and the same discipline applies whether we’re rebuilding a tank on a Drake or setting a one-piece Aquia on a slab floor in Redhawk. Our Toto sales & service work covers everything from trim rebuilds to complete bath remodels, and we stock OEM parts so the fix doesn’t stall waiting on a slow supply order.
Styles & brands we work with







Common Toto Construction Problems We Solve in Temecula
- Scaled fill and flush valves on Drake and Ultramax toilets. Temecula’s inland hard water leaves calcium and mineral scale inside the tank trim, which causes weak flushes, ghost-filling, and constant running. The china is usually fine. The trim is almost always the problem, and we rebuild it with genuine Toto parts rather than telling you to replace a toilet that still has decades in it.
- Washlet seat hinge and GFCI electrical failures. The long, dry heat cycles in Harveston and Redhawk stress the plastic hinge bosses on Washlet and Washlet+ seats until they crack. We also see the same seats wired into aging GFCI outlets from the original build, which trip or fail outright. Seat hinge, outlet, supply connection: those are the three points we check first.
- Leaks at the base of one-piece skirted models. Aquia and Ultramax II toilets get reinstalled on worn or high closet flanges during Temecula bath remodels, which produces slow base leaks and movement at the tile cutout. The toilet isn’t the problem. The flange height is, and that’s what we fix.
- Sticking dual-flush cartridges and inlet valves in guest baths. Aquia models in little-used bathrooms suffer after dry summers and Santa Ana dust intrusion. The flush cartridge sticks, the inlet valve sticks, and the flush volume becomes inconsistent. Owners don’t notice until a guest flushes and the bowl doesn’t clear.
- Improper rough-in or supply placement from previous work. We regularly open up a Temecula bath remodel and find a Toto installed with the supply line in the wrong position for the skirt, or a Washlet supply tee back-fed incorrectly. These are construction-phase errors that only surface after the tile is up, and they’re avoidable when the plumber knows Toto geometry before the wall closes.
Toto Service in Temecula: What Local Conditions Mean for Your Equipment
Because so much of Temecula was built late-1980s through the 2000s, the toilet flanges in Redhawk and Wolf Creek tract baths sit in slabs and tile floors from that era. When we pull a Drake or Aquia for a tile or shower remodel, the flange height and the cast-iron-to-PVC transition have to be re-set or the new Toto leaks at the base no matter how clean the install looks. That’s a Temecula-specific condition. In a city with newer suspended-wood subfloors it’s a different job, but here the slab, the tile, and the original iron all have to be accounted for. We see this pattern weekly in the 92591 and 92592 corridor, and it’s the single biggest reason a Toto “reinstall” turns into a callback. Alder Contractors handles the flange, the riser, and the tile interface as one scope, which keeps the warranty on the fixture and the floor intact.
Toto Models & Products We Service in Temecula
We work on the Toto Drake CST744 series two-piece elongated, the Ultramax II MS604 one-piece, the Aquia MS442 dual-flush, and the full Washlet and Washlet+ S-series line plus C200 and C5 seats. We use genuine Toto OEM tank trim, fill valves, flush towers, and seat hinges wherever the part is available, because aftermarket trim on Toto’s low-profile tanks is where comebacks start. For supply lines, wax versus rubber seals, and shutoffs, we spec quality name-brand parts. If the china and trapway are sound, which they usually are on Drake and Ultramax, we repair. We only recommend replacement when a cracked bowl, a failed one-piece casting, or a full bath redesign makes the fixture the cheap part of the job.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in Temecula
What you’ll pay depends on whether we’re rebuilding tank trim, resetting a flange, or pulling the whole fixture as part of a larger Temecula remodel. Here are the ranges we quote for the bath-scope work that typically accompanies Toto service.
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The estimate we give you is line-itemed so you can see trim parts, flange work, and finish scope separately. No open-ended allowances on the plumbing side. Call (833) 467-7020 to get an exact number for your Toto project in Temecula.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and also provide Murrieta Hot Springs Toto service, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in Temecula
Yes, we install and repair Washlet and Washlet+ seats throughout Temecula, including the S-series and C200/C5 models. The most common failures we see here are cracked hinge bosses from dry heat and GFCI electrical faults on the older outlets those homes were built with. We replace hinges with OEM parts, correct the wiring, and set the supply properly. Call (833) 467-7020 to schedule a diagnostic visit.
Almost never. A running Drake in Temecula is usually scaled fill-trim or a warped flapper from hard water, and both are repairable. We rebuild the tank with genuine Toto parts and keep the china, which costs a fraction of replacement. If you want a quote, call (833) 467-7020 and we’ll tell you over the phone whether it sounds like trim or something deeper.
In most cases yes, but the flange may need to be reset first. Those tract homes were built on slabs with cast-iron-to-PVC transitions that sit low under the tile, and a new skirted Toto will leak at the base if that flange height isn’t corrected. We handle the flange as part of the install, so the answer is: tell us which neighborhood you’re in — whether you need Toto repair in Murrieta or nearby — and which rough-in you have, and we’ll tell you exactly what’s involved.
Yes. We run the plumbing, tile, shower waterproofing, vanity, and finish work as one contract, including Toto fixture placement and Washlet electrical. About half of our Toto service calls in Temecula and Toto repair in Wildomar turn into full bathroom remodels once the homeowner sees the condition of the tile and flange. If you’re thinking of doing both, tell us upfront and we’ll price it as one scope.
Yes, and we’ve done it many times in Redhawk, Harveston, Wolf Creek, and Paseo del Sol. Interior bath remodels generally don’t need HOA approval in those communities, but if your project touches plumbing waste lines, re-pipes, or anything structural, we’ll confirm what your CC&Rs require before we start so you don’t get a notice mid-job. Call (833) 467-7020 and we’ll walk through your specific HOA’s review process.
Written by Nelson Ibarra, Owner at Alder Contractors, serving Temecula and the surrounding Inland Empire for nearly three decades. Do it right the first time – the callback always costs more than the extra hour up front.
Service Areas Near Temecula
We also cover Toto service in Idyllwild-Pine Cove for mountain homes with septic and well systems, and Toto service in Costa Mesa for coastal-adjacent slab construction. For Temecula, our team works every neighborhood inside the city, plus the rural east side through De Luz and the wine country roads off Rancho California Road. If you’re in the valley, we’re close. Our full Temecula service area covers 92590 through 92593.
Book Your Toto Service in Temecula Today
You can call Nelson and the Alder team at (833) 467-7020 for a free estimate on any Toto repair, replacement, or full bathroom remodel in Temecula. We’ll confirm your address, your rough-in, and your flange situation, then give you a written number and a start window that actually holds.