Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Perris, CA | Alder Contractors
We’re an independent hardscape contractor and Perris General Contractor installing and repairing Unilock pavers, walls, and slabs across the area. The one thing that separates our Unilock work here is the subgrade: Perris sits on former farmland, and we probe every lot before we lay a single unit because the old ag soil is where fields rut and heave. If you’re pricing a Unilock driveway, patio, or retaining wall in Perris, call (833) 467-7020 for a free estimate. We cover 92570, 92571, 92572, and 92599.
Why Perris Residents Choose Us for Unilock Service
We run Unilock Penter, Brussels Block, and Beacon Hill Flagstone on job sites throughout the Perris Valley and beyond, including Unilock in Mead Valley, the way other crews run framing lumber. Nelson Ibarra, our owner, cut his teeth on Inland Empire construction work starting in the Willow Avenue corridor of Rialto, and he has spent the better part of three decades watching what the Perris heat, wind, and hard water do to exterior materials. Our crews have laid and re-laid enough Unilock in 92570 and 92571 to know exactly how these units perform on ranch-era lots versus new tract subdivisions. We buy through the same distributors any Perris homeowner can access, and we are not authorized, sponsored, or endorsed by Unilock. Our expertise is field-tested and local, not a manufacturer badge. When we show up to a Perris job, we’re not learning the soil conditions on your dime.
We carry genuine Unilock accessories: edge restraint, polymeric joint sand matched to Unilock specs, and the right base materials for the Perris Valley’s expansive clay and old agricultural subgrade. That means repairs and new installs move faster and hold up longer. You get one contractor, every phase, from excavation to final compaction.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Perris
- Efflorescence bloom on Penter and Beacon Hill after the first summer. Perris hard water, well-fed irrigation systems in 92570, and triple-digit heat cycle pull salts through the paver face. We clean and, where needed, re-seal so the field doesn’t look chalky for the next five years.
- Polymeric joint sand loss and paver creep on driveways facing the open valley. Santa Ana wind events scour joints and push dust into the field. We re-sweep with Unilock-spec polymeric sand and reset edge restraint so units stop walking toward the street.
- Base failure and rutting on infill lots. A lot of Perris tract work sits on ground that was furrowed, disked, and irrigated for decades. Without proper excavation, geotextile, and compacted Class II base, Unilock fields rut within a season or two. We fix the base, not just the surface.
- Sun-baked color fading and edge spalling on older Brussels Block. The Perris sun is unrelenting, and tumbled units take it hard. We match replacement units where the field is salvageable and tell you straight when a full re-lay makes more sense.
- Settlement dips where a patio meets a ranch-era slab on grade in 92570. Older Perris homes settle differently than new builds. We pull the affected courses, correct the sub-base, and re-set so the transition stops tripping people.
Unilock Service in Perris: What Local Conditions Mean for Your Equipment
Perris grew fast on former agricultural land, and that history shows up under your pavers. In the 92571 subdivisions off the 74 side of town, a lot of ground was furrowed, disked, and flood-irrigated for decades before the first stucco went up. That soil compacts in one direction and then loosens unevenly under heat cycling. We probe and excavate the old ag subgrade before we lay base on any new Unilock install in Perris, because that loose, directionally compacted soil is where fields heave and rut within a season or two. A generic paver crew that treats Perris like any flat lot in Riverside County will miss it. We don’t.
On a Penter driveway job in the 92571 subdivisions, the homeowner’s field had heaved at the apron and lost joint sand after a winter wind event. Our crew pulled the affected courses and found the base had been laid thin over fill from the old farm grade. We re-excavated to proper depth, compacted Class II base with geotextile, and re-set the Penter with new polymeric joint sand and edge restraint. That field has held through two summers since. Do it right the first time: the callback always costs more than the extra hour up front.
Unilock Models & Products We Service in Perris
We install and repair the Unilock lines you’ll actually find in Perris driveways, patios, and pool decks, and we also handle Unilock repair in Romoland. Penter Paver is the rectangular, straight-edged workhorse on Inland Empire tract work. Brussels Block is the tumbled, chamfered unit you see on older 92570 ranch-front walks and patios. Beacon Hill Flagstone gives that large-format slab look for patios and pool decks. And for retaining and seat walls, we work with Brussels Dimensional Stone wall units. We use genuine Unilock edge restraint and distributor-stock polymeric sand compatible with OEM specs. When half a field is sound, we pull, screen, and re-set rather than sell you a whole new patio. That’s the honest approach, and it’s how we’ve built our name in Perris.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Perris
What you’ll pay depends on the size of the field, the condition of the subgrade, and whether we’re installing new or repairing an existing base. Here’s what Perris homeowners can expect:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every free estimate includes a site walk, subgrade assessment, and a written line-item quote. No change orders because we measured twice. Call (833) 467-7020 to schedule yours, and we’ll give you exact numbers for your Perris property.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Perris
In Perris, the difference is almost always the subgrade. If your neighbor’s field was properly excavated and compacted over stable ground, it stays flat. If yours was laid over old agricultural fill or a thin base, it settles. We find this constantly in 92571 lots built on former farmland. The fix is re-excavation and proper base, not a surface patch. Call (833) 467-7020 and we’ll tell you what’s under your field before we touch a paver.
No. We are an independent hardscape contractor. We install Unilock products regularly across Perris, and we buy through the same distributors any homeowner can access. We’re not sponsored, endorsed, or authorized by Unilock. Our value is field experience on Perris soil and honest recommendations, not a manufacturer label.
Yes. We use genuine Unilock edge restraint, distributor-stock polymeric joint sand compatible with Unilock specs, and proper base materials rated for the Perris Valley’s clay and heat conditions. If a field can be repaired with OEM-compatible components, we repair it. We don’t push replacement when re-setting solves the problem.
A standard paver patio repair on a Perris lot, or Unilock repair in Sun City, usually takes two to four days once we start, depending on how much subgrade work is involved. A full driveway install with proper excavation and base typically runs one to two weeks. We’ll give you a written timeline at the estimate, and we stick to it. Call (833) 467-7020 to lock in a start date.
We work with the lines common in Perris: Penter Paver for driveways and patios, Brussels Block for older ranch-style walks and patios in 92570, Beacon Hill Flagstone for pool decks and large-format patios, and Brussels Dimensional Stone for retaining and seat walls. If you have something else, call us and we’ll tell you straight if we can help. Estimates are free at (833) 467-7020.
Service Areas Near Perris
We run Unilock jobs throughout the Perris Valley and into the surrounding area, including Unilock service in Good Hope and Unilock service in Nuevo. We also cover Bloomington, Muscoy, and the older pockets around Riverside County where ranch-era homes and new tract builds sit side by side. If you’re just outside Perris, call and ask. If we can get to you, we will. See our Perris service area for full coverage details.
Book Your Unilock Service in Perris Today
If your Unilock field is heaving, losing joint sand, or just looking tired after a few Perris summers, we’ll give you an honest read and a written quote. Call (833) 467-7020 to schedule your free estimate. We install it right the first time. Unilock sales & service done properly, on Perris ground.
Written by Nelson Ibarra, Owner at Alder Contractors, serving Perris and the Inland Empire since 1994.